Mitel 6867i Premium, Administrator'S Manual, Page: 366 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-105
4.
If Phone-Side or Server-Side is selected, select a line from the
Line
list box for which you
want the IP phone to use as its configuration on the Intercom call.
5.
Click
Save Settings
to save your changes.
Incoming intercom Settings:
6.
Click on
Basic Settings->Preferences->Incoming Intercom Settings
.
7.
The "
Auto-Answer
" field is enabled by default. The automatic answering feature is turned
on for the IP phone for answering Intercom calls. To disable this field, uncheck the box.
8.
The "
Microphone Mute
" field is enabled by default. The microphone is muted on the IP
phone for Intercom calls made by the originating caller. To disable this field, uncheck the
box.
9.
The "
Play Warning Tone
" field is enabled by default. If “Auto-Answer” is enabled, the
phone plays a warning tone when it receives in incoming intercom call. To disable this field,
uncheck the box.
10.
The "
Allow Barge In
" field is enabled by default. If an active line on the phone receives
an incoming intercom call, the active call is put on hold and the phone automatically answers
the incoming intercom call. To disable this field, uncheck the box.
11.
Click
Save Settings
to save your changes.
GROUP PAGING RTP SETTINGS
An Administrator or User can configure a specific key (softkey, programmable key, or expansion
module key) on the phone that allows you to send/receive a Real Time Transport Protocol
(RTP) stream to/from pre-configured multicast addresses without involving SIP signaling. This
is called Group Paging on the IP phones. You can specify up to 5 listening multicast addresses.
An Administrator can use the following parameters in the configuration files to set Group Paging
RTP Settings:
• paging group listening
Note:
The IP phone uses the configuration from the line you select from this list
box. The call itself is made using the first available line at the time of the call.
Note:
If the Auto-Answer field is not checked (disabled), the phone treats the
incoming intercom call as a normal call.