manualshive.com logo in svg

Mitel 6867i Premium, Administrator'S Manual, Page: 215 / 1042

Share
Download
Mitel 6867i Premium Administrator'S Manual Download Page 215

Global SIP Settings

4-62

Specific sets of SIP parameters are inter-dependent with each other. To prevent conflicting 
parameter values from being applied, per-line values always take precedence over the 
corresponding set of global values.

For example, if a parameter value is configured for one of the per-line sets, all parameters from 
that set are applied and all parameters from the corresponding global section are ignored, even 
if some of the parameters within the global set are not defined in the per-line set.

SIP PASSWORD MASKING

The “

mask sip password

” configuration parameter can be used to mask a user’s SIP account 

password in the server.cfg and local.cfg files (downloaded from the IP phone’s Web UI 
troubleshooting page for debug purposes). The parameter is disabled by default.

Configuring SIP Password Masking

Use the following procedure to configure SIP password masking using the configuration files.

For specific parameters you can set in the configuration files, see Appendix A, the section, 

“SIP 

Basic, Global Settings”

 on 

page A-70.

SIP PRECEDENCE EXAMPLE

The following example shows the SIP proxy feature and example schema for storage and 
parsing of the SIP configuration parameters.

The following SIP configuration is assumed:

# SIP network block

sip proxy ip:  10.30.11.154

sip proxy port: 5060

sip registrar ip:  10.44.122.37

sip registrar port: 4020

sip line3 proxy ip: siparator.vonage.com

sip line3 proxy port: 0

Line3 specifies per-line values for proxy IP address and proxy port, so the phone uses those 
parameter values for SIP calls made on that line. However, because those parameters are part 
of the SIP network block, the phone does not apply any of the global SIP network block 
parameters. So even though the global parameters configure a SIP registrar, Line3 on the 
phone ignores all global network block parameters. Since line3 does not contain a per-line SIP 
registrar entry, the phone does not use a registrar for that line.

 CONFIGURATION FILES

Note: 

Global SIP parameters apply to all lines unless overridden by a per-line 

configuration. Per-line settings are configurable for lines 1 through 7.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments