Mitel 6867i Premium, Administrator'S Manual

Page: 875 / 1042

Operational, Basic, and Advanced Parameters
A-177
PARAMETER –
call hold reminder during active
calls
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables or disables the ability for the phone to initiate a continuous
reminder tone on the active call when another call is on hold. For
example, when the call on Line 1 is on hold, and the User answers a
call on Line 2 and stays on that line, a reminder tone is played in the
active audio path on Line 2 to remind the User that there is still a call
on hold on Line 1.
When this feature is disabled, a ring splash is heard when the active
call hangs up and there is still a call on hold.
FORMAT
Boolean
DEFAULT VALUE
0
RANGE
0 (disable)
1 (enable)
EXAMPLE
call hold reminder during active calls: 1
PARAMETER –
call hold reminder timer
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the time delay, in seconds, that a ring splash is heard on
an active call when another call was placed on hold. For example, if
a call comes into Line 1, and then a call comes into Line 2 and you
answer Line 2, Line 1 is automatically placed on hold. While on the
active Line 2, after 7 seconds, a ring splash audio sounds on the line
reminding you that the call on Line 1 is still on hold. This timer begins
to increment after Line 2 is answered.
Notes:
• This parameter is used with the “call hold reminder frequency”
parameter.
• You must enable this “call hold reminder timer” parameter for it to
work.
• A value of “0” disables the call hold reminder feature.
FORMAT
Integer
DEFAULT VALUE
7
RANGE
0-4294967295 seconds
EXAMPLE
call hold reminder timer: 10