Advanced Operational Features
6-41
ENABLING/DISABLING A REJECTION OF THE INV OR BYE
Use the following procedure to enable/disable the rejection of the INV or BYE if the INV or BYE
contains an unsupported value in the REQUIRE header.
For the specific parameter you can set in the configuration files, see Appendix A, the section,
“Rejection of INV or BYE”
on
page A-284
.
XML URI FOR KEY PRESS SIMULATION
The phones provide a feature that allow an XML Developer or Administrator to define XML Key
URIs that can send key press events to the phone, just as if the physical hard key, softkey, or
programmable key were pressed on the phone.
When the Key URI event is sent from the server to the phone, the phone initiates the event as
if the key was physically pressed. If the key is not present on the phone (hard key) or not
available (softkey or programmable key), when the phone receives the URI, the event is
discarded. If you are in the process of changing the softkey or programmable key setting, or
the key is disabled while the event is being processed, the request is discarded. The phone
maps key events to its physical keys and not to its mapped logical keys.
The following table identifies the XML URIs for pressing buttons on the phone..
CONFIGURATION FILES
XML KEY URI
DESCRIPTION
LINE KEYS
Key:Line1 to Key:Line<n>
Line 1 to <n>Keys
Note:
The phone ignores URI line key events if the line
keys are not physically present on the phone.
KEYPAD KEYS
Key:KeyPad0 to Key:KeyPad9
Numeric Keypad Keys 0-9
Key:KeyPadStar
* - Star Key
Key:KeyPadPound
# Hash Key
SOFTKEYS
Key:SoftKey1 to Key:SoftKey<n>
Softkey 1 to <n> (valid softkeys depend on the number
of physical softkeys on the phone)
Key:TopSoftKey1 to Key:TopSoftKey<n> top Top softkeys 1 to <n> ((valid top softkeys depend on the
number of physical top softkeys on the phone)
PROGRAMMABLE KEYS
Key:PrgKey1 to Key:PrgKey<n>
Programmable keys 1 to <n> (valid programmable keys
depend on the number of physical programmable keys
on the phone)
EXPANSION MODULE KEYS
Summary of Contents for 6867i Premium
