manualshive.com logo in svg

Mitel 6867i Premium, Administrator'S Manual, Page: 81 / 1042

Share
Download
Mitel 6867i Premium Administrator'S Manual Download Page 81

Administrator Level Options

3-11

•

Accessory Info

•

Displays firmware information about any accessories currently attached to the phone.

•

Network

•

IP Address

• Displays the IP address of the phone.

•

MAC Address

• Displays the MAC address of the phone.

•

LAN Port

• Displays the Link State, Negotiation Method, Speed, and Duplex Method that the 

phone uses on its LAN port.

•

PC Port

• Displays the Link State, Negotiation Method, Speed, and Duplex Method that the 

phone uses on its PC Port.

•

Storage

•

Displays the number of Local Directory, Received Callers, and Outgoing Redial List 
entries saved on the phone.

•

Error Messages

•

Displays any error messages that occurred during the phone’s last reboot.

PHONE STATUS VIA MITEL WEB UI

The first screen that displays after logging into the Mitel Web UI for a phone is the Status screen. 
This screen also displays when selecting 

Status->System Information

. The information on 

this screen is available to the user and the administrator as read-only.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments