Mitel 6867i Premium, Administrator'S Manual

Page: 204 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
4-51
4.
Select
Network > VLAN
.
To globally enable/disable VLAN and set priority for non-IP packets:
5.
In the
Basic Settings > VLAN
field enable VLAN by pressing the right navigation key.
6.
In the
LAN Port VLAN > Other Priority
field, change the non-IP priority value from
0
to
7
for non-IP packets.
Default for this field is
5
.
To set VLAN ID and priority for LAN Port (Port 0):
7.
In the
LAN Port VLAN > LAN Port VLAN ID
field, enter a value from 1 to 4095 to specify
the VLAN ID for the LAN Port. Default is
1
.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095
and the PC Port VLAN ID to any ID from 1 to 4094. The following example sets the PC
port to be on VLAN 3 but the LAN port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 4095
• VLAN Settings->PC Port VLAN->PC Port VLAN ID: 3
8.
In the
LAN Port VLAN > SIP Priority
field, enter a value from
0
to
7
to specify the SIP
priority for the LAN Port. Default is
3
.
9.
In the
LAN Port VLAN > RTP Priority
field, enter a value from
0
to
7
to specify the RTP
priority for the LAN Port. Default is
5
.
10.
In the
LAN Port VLAN > RTCP Priority
field, enter a value from
0
to
7
to specify the RTCP
priority for the LAN Port. Default is
5
.
To set VLAN ID and priority for PC Port (Port 1):
11.
In the
PC Port VLAN > PC Port VLAN ID
field, enter a value from 1 to 4095 to specify the
VLAN ID for the LAN Port. Default is
4095
.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and
the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port
to be on VLAN 3 but the PC port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3
Note:
Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from
1 to 4094 will allow frames from the PC port (containing a VLAN ID) to be untagged
before being forwarded to the LAN port and frames from the LAN port (without a
VLAN ID) to be tagged with the configured VLAN ID before being forwarded to the
PC port.
Note:
Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from
1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged
before being forwarded to the PC port and frames from the PC port (without a VLAN
ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.