Mitel 6867i Premium, Administrator'S Manual

Page: 481 / 1042

Operational Features
5-220
Configuring a Park/Pickup Key Using Mitel Web UI (for Asterisk, BroadWorks, Sylantro,
and ININ Call Managers)
For all phones you first configure the park and pickup keys at
Advanced Settings -> Line 1-N
by entering the appropriate value based on the server in your network.
For the 6867i, 6869i, and 6873i IP phones, you can enter a key label and change the softkey
states at
Operation->Softkeys and XML.
The default state of the park configuration is
"
connected
". The default state of the Pickup configuration is "
idle, outgoing
". On the 6863i
and 6865i IP phones, you can enter a key label at
Operation->Softkeys and XML
.
Park/Pickup Call Server Configuration Values
Use the following procedure to configure the park/pickup call feature using the Mitel Web UI.
For the 6867i/6869i/6873i:
1.
Click on
Advanced Settings ->Line 1
(you can select any line)
2.
Under
Advanced SIP Settings
in the “
Park Pickup Config
” field, enter the appropriate
value based on the server in your network.
Note:
Applicable values depend on the server in your network (Asterisk, BroadWorks,
Sylantro, ININ). See the table below for applicable values.
SERVER PARK VALUES* PICKUP VALUES*
Asterisk 70 70
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup
MITEL WEB UI
Notes:
1.
For values to enter in this field, see the table
“Park/Pickup Call Server Configuration
Values”
on
page 5-220
.
2.
Leave the park/pickup configuration field blank to disable the park and pickup
feature.