Mindray Trio Operating Instructions Manual Download Page 34

Page: 34 / 170

Trio™ Operating Instructions

0070-10-0666-01

2 - 5

Operations

System Menu

Entering the ID #, BED#, FIRST NAME and LAST NAME

Use the onscreen keypad to enter the ID #, BED#, FIRST NAME and LAST NAME
information, proceed as follows:

Select the

PATIENT SETUP

menu and use the Navigator™ Knob to scroll to the item

that will be entered or changed.

Press the Navigator Knob and the cursor will automatically move to the on-screen
keypad.

Move the cursor to the appropriate character and press the knob so that the character
appears in the box above. Continue this technique until the information for that item is
complete.

NOTE:

Select DEL to delete incorrect characters.

When finished entering the data for a particular item, select

. The patient

information will be displayed in the box for that menu item and the cursor will return
to the starting position.

Select

PREVIOUS MENU

to return to the previous menu. Select

NORMAL

SCREEN

(from the menu or the Front Panel Keypad) to exit the menu and return to the

normal screen.

Entering the GENDER, SIZE, BIRTH DATE, HEIGHT and WEIGHT.

Use the Drop-Down and Spin Edit Boxes to enter the GENDER, SIZE, BIRTH, HT. and WT.
information, proceed as follows:

NOTE:

Setting the SIZE will automatically select all user defined
defaults for that patient size.

Select the

PATIENT SETUP

menu and use the Navigator™ Knob to scroll to the item

that will be entered or changed.

Press the Navigator Knob to access the Drop-Down or Spin Edit box for that selection.

Scroll to the desired setting and press the knob to accept the selection.

Select

PREVIOUS MENU

to return to the previous menu. Select

NORMAL

SCREEN

(from the menu or the Front Panel Keypad) to exit the menu and return to the

normal screen.

2.3.2

List Trend

To access the

LIST TREND

menu/display, select

LIST TREND

from the

SYSTEM MENU

Refer to "Trends" on page 2-76 for details on List Trend functions.

2.3.3

Graphic Trend

To access the

GRAPHIC TREND

menu/display, select

GRAPHIC TREND

from the

SYSTEM MENU

. Refer to "Trends" on page 2-76 for details on Graphic Trend functions.

To Purchase, Visit

Avobus.com

or call

1-800-674-3655

Summary of Contents for Trio











































































































































































Search results

Summary of Contents for Trio

Reviews:

Related manuals for Trio

Brands by name

Popular brands

Mindray Trio, Operating Instructions Manual

Search results

Summary of Contents for Trio

Reviews:

Related manuals for Trio

Brands by name

Popular brands