Mindray Trio Operating Instructions Manual Download Page 106

Page: 106 / 170

Trio™ Operating Instructions

0070-10-0666-01

2 - 77

Operations

Trends

Graphic Trend Menu Selections

1. PARAMETER

• To change the parameter of data being displayed, select

PARAMETER

from the

GRAPHIC TREND

menu. Using the Navigator™ Knob, scroll to the desired

parameter and press the knob.

• The selections are:

NIBP

SpO2

IBP

, and

TEMP

2. INTERVAL

• To change the displayed

INTERVAL

, select

INTERVAL

from the

GRAPHIC TREND

menu. (The chosen interval can be saved as part of the

“User Default

Configuration”

by using the

SAVE CURRENT

function as described in section

2.3.5.9.)

• To view the latest hour of trended data, select either the

interval.

• To view the latest 24-hours of trended data, select the

1min

2min

3min

4min

interval.

3. SCROLL

• To view other segments of a graphic trend, select

SCROLL

from the

GRAPHIC

TREND

menu.

• When the right arrow key appears on the right side of the menu display, select

SCROLL

and turn the Navigator™ Knob clockwise to view older trend waveform

data.

• When the left arrow key appears on the left side of the menu display, select

SCROLL

and turn the Navigator Knob counterclockwise to view more recent trend

data.

4. SCALE

• To modify the scale upon which the graphic trend is displayed, select

SCALE

from the

GRAPHIC TREND

menu. The y-axis scale is adjustable based on the minimum and

maximum values for the particular parameter.

5. CURSOR

To view trend data at a specific point in time, select

CURSOR

from the

GRAPHIC TREND

menu:

• Turn the knob to move the cursor to particular data points. The data to which the cursor

points will correspond to the time displayed. The parameter data corresponding to the
particular point in time is displayed below the x-axis.

• When appears in the upper right portion of the menu, the user can scroll right to

view more recent trend data.

• When appears in the upper left portion of the menu, the user can scroll left to view

older trend data.

6. PRINT

• To print the graphic trend data for the currently selected parameter, select

PRINT

from

the

GRAPHIC TREND

menu.

• To stop the print job currently in progress, select

PRINT

on the front panel keypad.

To Purchase, Visit

Avobus.com

or call

1-800-674-3655

Summary of Contents for Trio











































































































































































Search results

Summary of Contents for Trio

Reviews:

Related manuals for Trio

Brands by name

Popular brands

Mindray Trio, Operating Instructions Manual

Search results

Summary of Contents for Trio

Reviews:

Related manuals for Trio

Brands by name

Popular brands