background image

38

39

 M18 

F2LM53

 

4913 03 01 XXXXXX MJJJJ

 

36 V (2 x 18 V) 

 

2800 / 3300 min

-1

 
 

0 – 2,5 km/h

 

0 – 3,5 km/h

 

0 – 4,5 km/h

 

0 – 5,5 km/h

 

0 – 6,5 km/h

 

533  mm

 

25 - 100 mm

 70 

l

 38,5 

kg

 IPX4
 -18...+50 

°C

 

2 x M18 HB12

 M12-18…; 

M1418C6

 

75,8 dB(A) / 3 dB(A)

 

93,3 dB(A) / 3 dB(A)

 
 12,7 

m/s

2

 / 1,5 m/s

2

ENGLISH

TECHNICAL DATA

Type
Production code
Battery voltage
Blade speed low/high
Self propelled driving speed
Speed 1
Speed 2
Speed 3
Speed 4
Speed 5
Deck size
Cutting height range
Grass catcher capacity
Weight according EPTA-Procedure 01/2014 (2 x 12,0 Ah)
Protection class
Recommended ambient operating temperature
Recommended battery types
Recommended charger

Noise information

Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K

Wear ear protectors.
Vibration information: 

Total vibration values (vector sum in the 

three axes) determined according to EN 62841.
Vibration emission value a

h

 / Uncertainty K

 

WARNING

  Read all safety warnings, instructions, 

illustrations and specifi cations provided with this power tool.

 

Failure to follow all instructions listed below may result in electric 
shock, fi re and/or serious injury.

Save all warnings and instructions for future reference. 

LAWNMOWER SAFETY WARNINGS

Do not use the lawnmower in bad weather conditions, 
especially when there is a risk of lightning. 

This decreases the 

risk of being struck by lightning.

Thoroughly inspect the area for wildlife where the lawnmower 
is to be used.

 Wildlife may be injured by the machine during 

operation.

Thoroughly inspect the area where the lawnmower is to be 
used and remove all stones, sticks, wires, bones, and other 
foreign objects

.Thrown objects can cause personal injury.

Before using the lawnmower, always visually inspect to 
see that the blade and the blade assembly are not worn or 
damaged.

 Worn or damaged parts increase the risk of injury.

Check the grass catcher frequently for wear or deterioration

A worn or damaged grass catcher may increase the risk of 
personal injury.

Keep guards in place. Guards must be in working order and 
be properly mounted.

 A guard that is loose, damaged, or is not 

functioning correctly may result in personal injury.

Keep all cooling air inlets clear of debris.

 Blocked air inlets and 

debris may result in overheating or risk of fi re.

While operating the lawnmower, always wear non-slip and 
protective footwear. Do not operate the lawnmower when 
barefoot or wearing open sandals.

 This reduces the chance of 

injury to the feet from contact with the moving blade.

While operating the machine, always wear long trousers

Exposed skin increases the likelihood of injury from thrown 
objects.

Do not operate the lawnmower in wet grass. Walk, never run. 

This reduces the risk of slipping and falling which may result in 
personal injury.

Do not operate the lawnmower on excessively steep slopes.

 

This reduces the risk of loss of control, slipping and falling which 
may result in personal injury.

When working on slopes, always be sure of your footing, 
always work across the face of slopes, never up or down 
and exercise extreme caution when changing direction.

 This 

reduces the risk of loss of control, slipping and falling which may 
result in personal injury.

Use extreme caution when reversing or pulling the 
lawnmower towards you.

 Always be aware of your surroundings. 

This reduces the risk of tripping during operation.

Do not touch blades and other hazardous moving parts while 

 

 WARNING! 

The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in 
EN 62841 and may be used to compare one machine with another. It may be used for a preliminary assessment of exposure.

The declared vibration and noise emission level represents the main applications of the machine. However if the machine is used for 
di

 erent applications, with di

 erent accessories or poorly maintained, the vibration and noise emission may di

 er. This may signifi cantly 

increase the exposure level over the total working period.

An estimation of the level of exposure to vibration and noise should also take into account the times when the machine is switched o

  or 

when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the e

 ects of vibration and/or noise such as: maintain the machine and 

the accessories, keep the hands warm, organization of work patterns.

 

Cordless self propelled lawnmower

ENGLISH

they are still in motion.

 This reduces the risk of injury from 

moving parts.

When clearing jammed material or cleaning the lawnmower, 
make sure all power switches are o

  and the battery pack 

is disconnected. 

Unexpected operation of the lawnmower may 

result in serious personal injury.

Stop the machine immediately after striking a foreign object or 
when the machine starts to vibrate abnormally.
Remove the battery pack(s) and make sure that all moving parts 
have come to a complete stop:

•  After striking a foreign object inspect the machine for damage 

and make repairs before restarting and operating the machine.

•  When the machine starts to vibrate abnormally immediately 

inspect for damage, replace or repair any damaged parts and 
check for and tighten any loose parts.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Do not operate the mower unless the grass bag, mulch plug, or 
rearside discharge are correctly installed and functioning properly. 
Check frequently for signs of wear or deterioration and replace as 
needed.

Keep safety devices (rear door, discharge attachment, bail, etc.) in 
place and working.

Inspect area and remove debris before mowing. Remove all 
stones, sticks, wires, bones, and other foreign objects. Beware of 
thrown objects. Objects struck by the lawn mower blade can be 
thrown and cause severe injuries and/or damage to the mower.

Disengage the self propelled mechanism on units so equipped 
before starting the motor.

Never attempt to make a wheel height adjustment while the 
mower is running.

Do not expose to water or operate on wet ground. Do not use in 
rain.

Keep hands and feet away from the blades. Do not reach under 
blade guard. Keep clear of the discharge opening at all times.

Do not direct discharge material toward anyone. Avoid discharging 
material against a wall or obstruction. Material may ricochet back 
toward the operator.

Look down and behind before and while moving backwards. Do 
not mow in reverse unless absolutely necessary.

Always be sure of footing; keep a fi rm hold on the handle and 
walk, never run.

Avoid holes, ruts, bumps, rocks, or other hidden hazards. Uneven 
terrain could overturn the machine, or cause operator to lose their 
balance or footing.

Stop the blade when crossing gravel drives, walks, or roads.

Shut the motor o

  and wait until the blade comes to a complete 

stop before removing the grass catcher or before unclogging the 
chute.

Do not leave a running machine unattended. Always park on level 
ground and turn o

  the mower.

Close battery cover during use.

Do not stare at the operating light when LED headlights are turned 
ON.

Never allow children, persons with reduced physical, sensory 
or mental capabilities or lack of experience and knowledge or 
people unfamiliar with these instructions to use the machine, local 
regulations may restrict the age of the operator.

Beware of thrown objects; keep all bystanders, children, and pets 
at least 30 m away from work area.

Do not operate in poor lighting. The operator requires a clear view 
of the work area to identify potential hazards.

Inspect the product before each use. Check for loose fasteners, 
etc. Make sure all guards and handles are properly and securely 
attached. Replace any damaged parts before use. Check for 
battery pack leaks.

Do not modify the product in any way. 

Do not allow children or untrained individuals to use the product. 

Wear full eye and hearing protection while operating the product. 
If working in an area where there is a risk of falling objects, wear 
appropiate head protection.

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.

Do not use the product when you are tired, ill, or under the 
infl uenceof alcohol, drugs, or medication. 

Keep fi rm footing and balance. Do not overreach. Overreaching 
can result in loss of balance or exposure to hot surfaces.

Do not tilt the machine when switching on the motor.

Remove the battery pack before starting any work on the 
machine.

Do not dispose of used battery packs in the household refuse 
or by burning them. Milwaukee Distributors o

 er to retrieve old 

batteries to protect our environment.

Do not store the battery pack together with metal objects (short 
circuit risk).

Use only System M18 chargers for charging System M18 battery 
packs. Do not use battery packs from other systems.

Battery acid may leak from damaged batteries under extreme 
load or extreme temperatures. In case of contact with battery 
acid wash it o

  immediately with soap and water. In case of eye 

contact rinse thoroughly for at least 10 minutes and immediately 
seek medical attention.

Warning! 

To reduce the risk of fi re, personal injury, and product 

damage due to a short circuit, never immerse your tool, battery 
pack or charger in fl uid or allow a fl uid to fl ow inside them. 
Corrosive or conductive fl uids, such as seawater, certain industrial 
chemicals, and bleach or bleach containing products, etc., can 
cause a short circuit.

Slope Operation

Do not operate on inclines greater than 15°. Mow across slopes, 
not up and down.

Operation on slopes increases the risk of slipping and falling which 
may result in  severe injuries. 

Operation on slopes requires extra caution. If you feel uneasy on 
a slope, do not mow it.

Always be sure of your footing. A slip and fall can cause serious 
personal injury. If you feel you are losing your balance, release the 
bail bar immediately.

Exercise extreme caution when changing direction on slopes. 
Avoid starting and stopping on slopes. Avoid making sudden 
changes in speed or direction. Make turns slowly and gradually.

Use caution while operating near dropo

 s.

Do not operate machine under any condition where traction, 
steering, or stability is in question. Tires could slide even if the 
wheels are stopped.

Always keep the machine in control when going down slopes. Do 
not coast downhill.

Use extra care while operating the machine with a grass catcher. 
A heavy grass catcher can a

 ect the stability of the machine.

Watch for holes, ruts, rocks, hidden objects, or bumps which can 
cause you to slip or trip. Tall grass can hide obstacles. Remove all 
objects such as rocks, tree limbs, etc., which could be tripped over 
or thrown by the blade.

SPECIFIED CONDITIONS OF USE

The cordless lawnmower is intended for outdoor use only.

The lawn mower is intended for lawn mowing at ground level. It is 
a pedestrian-controlled walk-behind mower designed to be used 
with the self-propel feature. 

The lawn mower should never be operated with the wheels o

  the 

ground. It should not be pulled or ridden on.

Do not use this product in any other way as stated for normal use.

Summary of Contents for M18 F2LM53




























































































Reviews: