Page 66
Warranty
CSP2008
6.
Warranty
All components of the device have been checked and tested for perfect function in the
factory. In the unlikely event that errors should occur despite our thorough quality con-
trol, this should be reported immediately to MICRO-EPSILON.
The warranty period lasts 12 months following the day of shipment. Defective parts, ex-
cept wear parts, will be repaired or replaced free of charge within this period if you return
the device free of cost to MICRO-EPSILON. This warranty does not apply to damage
resulting from abuse of the equipment and devices, from forceful handling or installation
of the devices or from repair or modifications performed by third parties.
No other claims, except as warranted, are accepted. The terms of the purchasing
contract apply in full. MICRO-EPSILON will specifically not be responsible for eventual
consequential damages. MICRO-EPSILON always strives to supply the customers with
the finest and most advanced equipment. Development and refinement is therefore per-
formed continuously and the right to design changes without prior notice is accordingly
reserved.
For translations in other languages, the data and statements in the German language
operation manual are to be taken as authoritative.
7.
Service, Repair
In the event of a defect on the controller:
-
If possible, save the current controller set-
tings in a parameter set, see Chap.
5.3.12
,
in order to load again the settings back into
the controller after the repair.
-
Please send us the effected parts for repair
or exchange.
The opening of the controller is only subjected
to the manufacturer. In the case of faults the
cause of which is not clearly identifiable, the
whole measuring system must be sent back to
MICRO-EPSILON Optronic GmbH
Lessingstraße 14
01465 Langebrück / Germany
Tel. +49 (0) 35201 / 729-0
Fax +49 (0) 35201 / 729-90
[email protected]
www.micro-epsilon.com
Summary of Contents for CSP2008
Page 1: ...CSP2008 Instruction Manual Channel 1 in mm 14 452...
Page 79: ......
