MICRO-EPSILON CSP2008, Instruction Manual

Page: 23 / 80

Page 23
Operation
CSP2008
5.2.4 Measured Value Presentation with Ethernet
Start the demonstration diagram display
Measurement
in the horizontal navigation
bar.
The control and display of the diagram are loaded in the browser which continues to run
there autonomously while the CSP2008 continues to operate independently of this.
i
If you let the diagram or value display run in a separate tab or window of the
browser, you do not have to restart the display every time.
Select
Chart
or
Save continuously
from the vertical navigation bar.
Click on the button
Start
to start the display of the measurement and calculation
results.
Click on the button
Stop / Save
to save the previously accumulated measure-
ment and calculation results in a CSV compatible file inclusive timing information.
As only one of both functions via Ethernet can be active, the demo cannot be started
until a possible saving of the measurement values via Ethernet has been finished.
Fig. 16 Presentation of the measurement and calculation results
Each curve can be deactivated and activated using the associated checkbox (check-
mark). In addition, the horizontal scrolling (slider) is possible in the diagram.
With the menu item
Save continuously
you can let save up to six results of sensor
inputs or calculation blocks with a variable number of decimal places as a frame in an
Excel-compatible file without timing information.
A requirement for this is that the measurements to save for output via Ethernet, see
Chap.
5.3.11.2 , were defined.