MICRO-EPSILON CSP2008, Instruction Manual

Page: 8 / 80

Page 8
Functional Principle, Technical Data
CSP2008
2.2 Controls and Display Elements
2.2.1 Keyboard
The Universal Controller has a small keypad with four membrane keys. The Universal
Controller and the connected sensors can be programmed with this in the Settings
mode.
ESC
Mode
Measure-
ment
(Standard)
Change display layout; display various meas-
ured values simultaneously.
Change to the mode Settings .
Mode
Settings
Scroll in the menu, reduce value,
increase value.
Activate selection or apply change.
ESC
Return to previous menu level,
change to the mode
Measurement.
Mode Measurement : You change the display layout with the arrow keys in the measure-
ment mode. Depending on the layout, many different measured values can be displayed
simultaneously. The operating menu is called by pressing the button " " .
Mode
Settings : In the menu mode, the arrow keys are used for the selection of the
values shown on the display (scrolling). Clicking the button " " saves the current selec-
tion. Using the ESC key, you return to the previous menu level or return to the mode
Measurement .
The following applies for editing numbers:
- Press the button " ". The cursor moves to the first position
- Edit this digit using the arrow keys (Up, Down).
- Move one position to the right: Press the button " ".
- Move one position to the left: Press the "ESC" key.
- The decimal point is fixed, i.e. smaller numbers must start with zeroes.
- The leading sign is reached with the "ESC" key; change with the arrow keys.
- After adjusting the last position, the number can be saved using "OK" (with the arrow
keys) and the button " " .
- Press the "ESC" key to exit from the menu without saving.
- The active display part (number area or function) is framed; the active element (posi-
tion or function) is shown in inverse video.
Parameter A
-?- Edit OK
- 0 0001.0000
Fig. 2 Number adjustment window Display (example parameter A) / Keyboard
i
Save your settings in the menu
Load/Save settings.
Use a
Setup
number if
necessary. Otherwise, the save is only temporary until the next time the controller is
switched off.
Press the
ESC
key several times if necessary to exit without changes until the previous
menu item is reached.
Changing between the individual menu items can be performed with the arrow keys.
Almost every menu item has its own help which can be invoked with
Help
or
?
.