![background image](http://html1.mh-extra.com/html/maha/connect-series/connect-series_original-operating-instructions_694960054.webp)
54
BA023001-en
4.5
Functional test
The acceptance of the brake tester is carried out by an expert. He checks all functions
and safety devices and confirms the result. In addition, a second sheet enclosed with
the operating instructions (“Quality Certificate for Installation and Commissioning”)
must be completed in full and returned to the manufacturer.
During the acceptance process, the following points must be checked again in
particular:
•
Free movement of sensing roller holder and sensing roller
•
Electrical connection of the brake tester
•
Potential equalisation
•
Correct setting of all Namur sensors (check via Service technician menu)
•
Firm fit of control cabinet and brake tester
•
Smooth running of the motors
WARNING
Only carry out the function test on the floor assembly with the motor-protective cir-
cuit-breakers switched off!
Summary of Contents for CONNECT Series
