MAHA CONNECT Series, Original Operating Instructions

Page: 92 / 138

92
BA023001-en
7.2 Care instructions
•
The machine should be cleaned at regular intervals and treated with a machine
care product.
•
Any damage to the paintwork should be repaired immediately to prevent corro-
sion.
•
To prevent damage, cleaning work must not be carried out with harsh cleaners or
with high and steam pressure equipment.
Regular care is the most important requisite for the unit's functional efficiency and
long service life!
7.3
Inspection and maintenance schedule
Daily before operating
•
Check the function of the sensing roller spring before switching on.
Weekly
•
Visual inspection of the entire test bench for damage.
Monthly
•
Clean, retighten and lubricate chains.
•
Lubricate sensing roller hinges.
Annually
•
The maintenance interval prescribed by the manufacturer is 12 (twelve) months .
This maintenance interval refers to normal workshop use. If the device/system is
used more frequently or under more difficult operating conditions (e.g. in outdoor
areas), the interval must be shortened accordingly.
•
Maintenance work may only be carried out by specially authorised and trained
personnel. Such specialist staff include authorised, trained specialists employed by
the manufacturer, the authorised dealers and the relevant service partners.
•
Failure to do so will void the manufacturer's warranty.
7.4 Maintenance of the chains
Remove the cover plates from the roller set on the chains and refit them before com-
missioning.