MAHA CONNECT Series, Original Operating Instructions

Page: 60 / 138

60
BA023001-en
6.3
Preparations
=
6.3.1 Switching on the test bench
Set main switch -Q1 to position "I".
6.3.2 Variant 1: Establish LAN connection to PC/notebook
The control board of the brake tester generates a website, via which the user guidance
and the measured value display takes place.
The easiest way to connect to a C_MBT test bench is to use a standard computer with
an Internet browser. All common browsers (e.g. Mozilla Firefox, Microsoft Edge,
Google Chrome) are supported in their current version.
•
Connect a PC or notebook (NB) to the central module (ZM) via network cable
(Ethernet port X13 “MAHA”).
•
Alternatively, a WiFi access point can be connected to this Ethernet port X13,
which usually offers four network interfaces. Then a PC/NB is connected to one of
these interfaces. Other terminal devices can be connected to the other interfaces
(e.g. analogue display or C_BOX when using a TV monitor as a simultaneous dis-
play).
•
Switch on PC/NB, log in after booting, open browser.
6.3.3 Establish a browser connection
•
Call the start page in the browser via the address: http://maha-mbt(.maha) .
•
Once the connection is established, the measurement screen is displayed: