MAHA CONNECT Series, Original Operating Instructions

Page: 99 / 138

99
BA023001-en
8.2 Error codes
Description:
Error codes have a 5-digit notation according to the scheme "YY0XX"
•
YY stands for the error code group (e.g. 32 "Speed sensor of the left sensing roller)
•
0 serves here as separator
•
XX stands for the subcategory of the respective fault code group (e.g. 00 for cable
break)
•
Complete exemplary error code:
32001 "Cable break at the speed sensor of the left sensing roller"
•
All error codes are written to a log file and can be read out if required, see section
"Operation > Settings > Event logging".
•
On a C_MSA analogue display, only the error code group is indicated by the two
pointers; the complete 5-digit error code must be taken from the log file.
Error code 01000
Description Incomplete adjustment of the braking force
Possible solution Carry out the adjustment of the braking force
Error code 02000
Description Incomplete adjustment of the weighing device
Possible solution Carry out the adjustment of the weighing device
Error code 11000
Description Internal control error
Possible solution Restart the entire system
If possible, perform an update
Error code 11001
Description SPI bus error
Possible solution Restart the entire system
If possible, perform an update
Error code 11002
Description UART error
Possible solution Restart the entire system
If possible, perform an update
Error code 11003