135
BA023001-en
b.
Reverse direction of rotation/measurement
Select "Reverse direction of rotation/measurement" in the burger menu using
navigation keys Up (
˄)
, Down (
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
c.
Single wheel left
Select "Single wheel left" in the burger menu using navigation keys Up (
˄)
, Down
(
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
d.
Single wheel right
Select "Single wheel right" in the burger menu using navigation keys Up (
˄)
, Down
(
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
e.
Four-wheel
Select "Four-wheel" in the burger menu using navigation buttons Up (
˄)
, Down (
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
f.
Automatic roller start (for testing vehicles under 3.5 t pTW)
Select "Automatic roller start" in the burger menu using navigation keys Up (
˄)
,
Down (
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
g.
Pre-trigger
Select "Pre-trigger" in the burger menu using navigation keys Up (
˄)
, Down (
˅)
and confirm with (ok).
(Slide switch in burger menu goes ON.)
•
Manual motor start when driving on the test bench
If the roller set is occupied on both sides and the motor start button (I) is pressed on
the remote control, a pop-up window "Confirm motor start with (ok)" appears on the
screen. If the (ok) button is pressed, the rollers start according to the preselected
direction of rotation.
By pressing the motor stop button (0) on the remote control, both motors are
switched off immediately.
After the motors have stopped, it is possible to restart the motors by pressing the
motor start button (I), the pop-up window "Confirm motor start with (ok)" appears
again on the screen.
•
Repeat/overwrite Car axle
Pressing the Up (˄) or Down (˅) navigation buttons will scroll to the “
Car axle/brake
assignment
”
field. The cursor automatically jumps to the active brake type. By means
of the Left (<) or Right (>) navigation buttons you can scroll between the three brake
types FA, PB, RA.
Summary of Contents for CONNECT Series
