MAHA CONNECT Series, Original Operating Instructions

Page: 37 / 138

37
BA023001-en
3.3 Packaging information
•
Roller set on separate Euro pallet:
Dimensions (L x W x H, depending on equipment) ............. approx. 230-300 x 70 x 50 cm
Weight (depending on equipment) .................................................... approx. 500-800 kg
•
Control cabinet on separate Euro pallet:
Dimensions (L x W x H, depending on equipment) ............. approx. 120-300 x 80 x 60 cm
Weight (depending on equipment) ...................................................... approx. 70-100 kg
3.3.1 Centre of gravity of the packed roller set
The centre of gravity is approximately in the centre of the roller set or roller set halves.
3.4 Transport and handling
Transport and handling of the test bench is only permitted in the original packaging.
On the pallet the packed test bench can be moved with the forklift truck. For loading,
unloading and insertion into the foundation, use the pick-up points shown below.
Hand over the load suspension lugs to the operator for reuse (dismantling, repair) after
the transport process.
Dimensions and centre of gravity of the packed test bench are shown in section
“Packaging information”.
Pick-up points of the packed test bench
3.5
Storage
The packages must be stored in a covered location and protected from direct sunlight.
Storage must take place at a temperature between -10 °C and +60 °C.
Packaging waste must be disposed of in accordance with applicable environmental
regulations.