MAHA CONNECT Series, Original Operating Instructions

Page: 128 / 138

128
BA023001-en
5 Leave the menu open and go to the C_BOX.
6 Briefly press the pairing button of the C_BOX.
o
To do this, press a thin object into the lower opening.
o
The pairing field of the C_BOX appears with a counter. After the countdown has
elapsed, pairing is automatically terminated.
7 The C_BOX couples with the test bench and loads the test bench website.
o
As soon as a connection has been established with a specific test bench, the
C_BOX always connects to it.
8 In the menu item “ External devices ” of the test bench, the C_BOX is now displayed
as "Connected". The pairing can be completed by pressing the button "End
pairing" and exiting the Service technician menu.
11.4.7 Error handling
Open configuration page
The configuration page is only displayed if no connection to the test bench could be
established yet. If the test bench view is already displayed, it is possible to navigate to
the configuration page by holding the WPS button on the C_BOX for at least 7 seconds.
By holding the WPS button again for at least 7 seconds, it is possible to switch back to
the test bench page. No settings are lost in the process.
C_BOX is not displayed in the list of external devices?
•
Check connection (WiFi, LAN).
•
Restart C_BOX (press button on the right side).
NOTICE
The coupling in the device overview is blocked if another test bench already has an
active coupling in the same network. This prevents unwanted coupling.
11.4.8 Software update
1 Download update from the support area of the MAHA homepage www.maha.de.
2 Connect C_BOX to PC/notebook via LAN cable.
o
The network interface of the computer must be configured as a DHCP client.
This means that the options "Obtain IP address automatically" and "Obtain DNS
server address automatically" must be activated in the properties of the
corresponding Ethernet connection in the "Internet protocol, version 4"
element.