Mace HydroMace XCi, Product Manual, Page: 74 / 270

AT+ Com-
mand Description
Enter the AT+command "
AT+COPS=?
" and click "
Send
"
The response will include the identifiers of all networks in an area:
Eg. (2,"Telstra Mobile",,"50501",2), (2,"Telstra Mobile",,"50501",0), (3,"YES
OPTUS",,"50502",2), (3,"YES OPTUS",,"50502",0), (3,"vodafone
AU",,"50503",2),(3,"vodafone AU",,"50503",0),,(0-4),(0,2)
AT+COPS? Used to verify the identity of the network that the WebComm is connected too.
Enter the AT+ command " AT+COPS? " and click " Send "
The modem will respond with the network identifier to which it is currently
connected.
Eg. +COPS: 0,0,"Telstra Mobile",2
AT#AUTOBND Used to enable or disable the automatic band selection at power
‐
on.
AT#AUTOBND= [<value>] Set
AT#AUTOBND? Read
AT#AUTOBND=? Test
Value:
0 Disables automatic band selection at next power
‐
up.
1 Enables automatic band selection at next power
‐
up. The automatic band
selection stops as soon as a GSM cell is found (deprecated).
2 Enables automatic band selection in four bands (at 850/1900 and 900/1800);
differently from previous settings it takes immediate effect. Default: 2 .
Consult MACE for further details on band selection
MACE XCi User Manual - 74 -