Mace HydroMace XCi, Product Manual, Page: 229 / 270

Add a new "4-20mA" output
1. From the " Configure channels " dialogue click " Add " and the " Select output type " box will open.
2. Select " 4..20mA out " and click " Continue ".
3. Select the appropriate physically wired output from which the output will send its 4-20mA current and
click " Continue ".
4. Select the “ Source channel ” from the drop down list that you wish to output and click " Continue ".
NOTE: Only channels that are suitable for outputting as a 4-20mA proportional
current will be available for selection.
Edit a "4-20mA" output
From the " Configure outputs " dialogue box, highlight the output you wish to edit and then click " Edit ".
MACE XCi User Manual - 229 -