Mace HydroMace XCi, Product Manual, Page: 24 / 270

7. If using a 16-30VDC mains charger then plug this into the socket shown in the picture below.
Alternatively, the charger may be wired into the solar panel screw terminal block (
to the left of the
socket
).
8. Once all the cables are connected the system should be fully tested. Assuming everything is
connected and fully functional, in order to prevent insects and/or moisture damaging the system, the
cable entry point should be sealed with an appropriate product. Suitable sealants include:
l
PanDuit DS1 - Duct Seal Putty (Supplied in MACE mounting kit P/N 850-302)
l
Gardner Bender® Duct Seal Putty
l
Aftek® Foam Filler
l
Great Stuff® Pestblock Insulating Foam
Sensor and power cables routed through conduit
1.
NOTE: During installation, some users may find it preferable to remove the
MACE XCi User Manual - 24 -