Mace HydroMace XCi, Product Manual, Page: 21 / 270

Installing on a 2" pole
Sensor and power cables routed inside the pole
1.
NOTE: During installation, some users may find it preferable to remove the
battery and internal cards prior to "knocking out" the cable entry point. Refer
to Installing FloSeries3 Cards for details on re-installation.
Place the XCi device on a work bench and using a hammer and screwdriver carefully knock out the
plastic cable entry point from the rear of the enclosure. It is only thin plastic and is designed to break
away at the edges so work your way around the edge of the oval shape until the cover is completely
broken free of the unit.
2. File away any rough edges from the plastic cable entry point
MACE XCi User Manual - 21 -