Mace HydroMace XCi, Product Manual, Page: 223 / 270

Example 2 - The "
R0
" command
In the 2nd example, the sensor on Address “ 1 ” of the SDI-12 bus has responded to a “ R0 ” command with
the Response “ 1+1.0+2.0+3.0+4.0 ”.
The 1st digit is the Address identifier ( 1 ). The four measurement values with a polarity sign (+/-) follow.
WARNING: The user MUST ensure the position of the measurement values in the
string are noted BEFORE adding “ Add a new "SDI-12" input type ". In the string the
measurement after the address identifier is called “ Value number 1 ”.
MACE XCi User Manual - 223 -