Mace HydroMace XCi, Product Manual, Page: 178 / 270

"Flowrate (using velocity)"- channel type
This channel type is used to calculate a flow rate based upon the results obtained from configured velocity
and depth channels.
Add a "Flowrate (using velocity)"- channel type
1. After selecting the "" Flowrate (using velocity) " channel type and naming the new channel, the
" Select velocity channel " dialogue box will appear prompting you to use the drop down list to
highlight the " Velocity channel " from which the new " Flowrate (using velocity) channel " will
receive its value.
2. Click “ Continue ” and the “ Flowrate measurement type " dialogue box will appear.
3. Select either “ Full circular pipe
” or “
Circular pipe using depth
” depending upon your application.
4. If you select “ Full circular pipe ”, click “ Continue ” to complete the new channel. If you select
“ Circular pipe using depth ”, click “ Continue ” and the “ Select depth channel ” dialogue box will
appear. In the “ Select depth channel ” dialogue box use the drop down list to highlight the " Depth "
channel from which the " Flowrate (using velocity) " channel named will receive its value. Click
“ Continue ” to complete the new channel.
MACE XCi User Manual - 178 -