Mace HydroMace XCi, Product Manual, Page: 222 / 270

"User defined"
WARNING: It is imperative that the correct sensor address be entered into the
“ Address ” field prior to sending this command.
Enter the known address of the sensor you wish to command in the “
Address
” field. Enter a valid SDI-12
command into the text field and click “
Send command
”. The sensor will respond (if active) in the
“
Response
” field.
Example 1 - The " C " command
In the example , the sensor on Address “ 1 ” of the SDI-12 bus has responded to a “ C ” command with the
Response “ 101504 ".
The 1st digit is the Address identifier ( 1 ). The 2nd, 3rd and 4th digits are the time the sensor requires to
take a measurement ( 015 seconds). The 5th and 6th digits are the number of measurement values that
will be sent ( 04 ).
WARNING: The user MUST ensure that the time required for the sensor to take a
measurement is noted BEFORE adding Add a new "SDI-12" input type .
MACE XCi User Manual - 222 -