Mace HydroMace XCi, Product Manual, Page: 156 / 270

NOTE: If a “ Velocity ” or “ Depth ” channel type is configured on a “Card” input the
measurement units are defined according to the “ System settings ”. If a " Flowrate "
channel type is configured, a drop-down of both " Units " and " Timebase " will be
provided.
Value at 4mA
Enter the value that corresponds to an input of 4mA
Value at 20mA
Enter the value that corresponds to an input of 20mA
Offset adjust
Perform an " Offset adjust " to fine tune the sensor readings. See "Offset adjust" function
2 point calibration
Perform a "
2 point calibration
" to span the sensor if the 4mA and 20mA values are either unknown or
changed. See
"2-Point Calibration" function
MACE XCi User Manual - 156 -