Mace HydroMace XCi, Product Manual, Page: 135 / 270

NOTE: If a configuration file for an HydroMACE XCi device contains cards that are
not available, or in different slot numbers than the XCi device into which you are
trying to load the file, then the loading procedure will attempt to " Cleanup " the
configuration. The following steps may be necessary:
1. From the " Load configuration " dialogue, note any " Configuration
discrepancies " and assess whether or not they are to be expected. If not, a
particular card may need to be re-installed (see Installing FloSeries3 Cards )
2. Click on " Cleanup " and the " Missing cards " dialogue will ask whether you
wish to remove the missing cards. After verification, click " Remove "
3. Any " Dependent channels and outputs " will be listed. After verification, click
" Remove " again and you will be asked " Are you sure? "
MACE XCi User Manual - 135 -