Mace HydroMace XCi, Product Manual, Page: 27 / 270

5. If using a 16-30VDC mains charger then plug this into the socket shown in the picture below.
Alternatively, the charger may be wired into the solar panel screw terminal block (to the left of the
socket).
6. Once all the cables are connected the system should be fully tested. Assuming everything is
connected and fully functional, in order to prevent insects and/or moisture damaging the system, the
conduit entry point should be sealed with an appropriate product. Suitable sealants include:
l
Aftek® Foam Filler
l
Great Stuff® Pestblock Insulating Foam
l
Geocel® Plumbers Putty
l
Gardner Bender® Duct Seal Putty
MACE XCi User Manual - 27 -