215922
224
Revision A
To program a float setting for each of the deck shift positions, follow these steps:
1014803
A
B
Figure 4.238: GSL
1.
Start the engine, and use HEADER TILT switches (A) and (B)
on the ground speed lever (GSL) to set header tilt to the
mid-range position.
10127561012756
A
B
Figure 4.239: Header Engage Switch
2.
Engage the header by pushing and holding HEADER
ENGAGE switch (A) down, and pulling up on collar (B).
1014967
A
B
C
Figure 4.240: Header Deck Shift Switches
3.
Select one of the following deck positions using the DECK
SHIFT switches on the operator
’
s console:
•
Right-side delivery (A)
•
Center delivery (B)
•
Left-side delivery (C)