215922
181
Revision A
1000758
A
B
Figure 4.136: Hydraulic Center-Link
27.
Windrowers without self-aligning center-link:
a.
Shut off the engine and remove the key.
b.
Disconnect center-link by lifting release (B) and lift
hook (A) off header.
DANGER
Ensure that all bystanders have cleared the area.
c.
Start the engine.
1000786
A
B
Figure 4.137: Header Stand
28. Back windrower away from header.
29. Reinstall pin (A) into header leg, and secure with
hairpin (B). Repeat this step on the other header leg.
4.5.2
Adjusting Header Settings on Harvest Performance Tracker
Before operating the header, ensure that the Harvest Performance Tracker (HPT) settings are appropriate for your header.
1018929
A
B
Figure 4.138: Header Settings
1.
Navigate to the SETTINGS menu using soft key 5 and the
HPT scroll knob. For instructions, refer to
Harvest Performance Tracker Display, page 84
.
2.
Scroll to SET-UP HEADER option (A) and press the scroll
knob to select it.
NOTE:
The settings displayed will vary depending on the type of
header attached to the windrower.
3.
Scroll to highlight the appropriate option and press the
scroll knob to select it.
For example, if a draper header is attached, and
ATTACHMENTS (B) is selected, the available choice is
DOUBLE DRAPER DRIVE.
