215922
164
Revision A
1022070
Figure 4.94: Draper Header Information
Header information:
The information displayed depends on the type of header
attached to the windrower and which run screen is active.
•
Run screen #1:
Displays reel, draper, knife, disc, or auger
speed and pressure; alarm point; and indexing (factory-set
according to header)
•
Run screen #2:
Displays draper, knife, or disc speed and
pressure; reel height and fore-aft position; hydraulic
pressure; and load bar
NOTE:
Master controller software MCAK203587P (or later) required
to accurately display changes in draper speed.
•
Run screen #3:
Displays fuel per hour/acre, acres per hour,
and sub acres per hour (resettable)
•
Run screen #4:
Displays cooling fan speed, engine air intake
temperature, hydraulic oil temperature, and engine coolant
temperature
1016040
Figure 4.95: Current Header Position
Current header position:
•
Displays basic header functions: height and angle
1016051
A
B
Figure 4.96: Faults/Telltales
Telltales:
•
Telltales (A) indicate an engine or windrower fault
•
Telltales are amber or red in color accompanied by a
symbol for the fault
•
Telltales display a short description (B) of the fault
