MacDon M1170NT5, Operator'S Manual

Page: 107 / 504

215922
87
Revision A
1016115
A
B
C
Figure 3.84: QuickMenu System
2. Use the HPT scroll knob or the GSL scroll wheel to move red
cursor (A) around the screen. The following selectable areas
are highlighted in white and can be changed while in
motion using the QuickMenu system:
•
Ground speed limit (A)
–
Refer to Adjusting Ground
Speed Limit, page 129 .
•
EEC throttle limit (B)
–
Refer to Programming Eco
Engine Control, page 124 .
•
Header float (C)
–
Refer to Setting Float, page 191 .
•
Header adjustments (when header is running [not
shown])
–
Refer to 4.6 Operating Header, page 189 .
•
Knife speed
–
Refer to 4.7.7 Knife Speed, page 218 .
•
Access maintenance information
–
Refer to 3.17.8
Machine Information Pages, page 103 .
•
Adjust auto speed settings
–
Refer to 4.7 Operating with
D1X or D1XL Series Draper Header, page 203 .
•
Define header alarm speeds
–
Refer to 4.7 Operating
with D1X or D1XL Series Draper Header, page 203 .
•
Header Alarm pressure
–
Refer to 4.7 Operating with
D1X or D1XL Series Draper Header, page 203 .
•
Manage telltales
–
Refer to Faults and Telltales, page
92 .
•
Turn auto speeds ON/OFF
–
For instructions, refer to
4.7 Operating with D1X or D1XL Series Draper Header,
page 203
.
3. Place the red cursor (red border [A]) over the function you
want to adjust, and press the HPT scroll knob or GSL SELECT
button to display a submenu containing the adjustable
values within the selected function.
OPERATOR
’
S STATION