MacDon M1170NT5, Operator'S Manual, Page: 159 / 504

215922
139
Revision A
1019423
A
Figure 4.46: HPT Display
1. Press soft key 4 (A) on the Harvest Performance
Tracker (HPT) to open the COOLING DATA display.
NOTE:
Soft keys 1
–
5 also function as buttons within menus.
NOTE:
The engine fan speed will increase or decrease, depending
on the windrower
’
s cooling requirements. A small fan icon
will appear beside the icon of the parameter that is
currently controlling the fan.
NOTE:
The engine fan will automatically reverse on a set time
interval, or when one of the system temperatures gets high
enough. No operator input is required to reverse the fan.
In this screen, you can view:
•
Fan speed
•
Engine air intake temperature
•
Engine coolant temperature
4.3.6 Transporting
The windrower can be driven from one location to another. If correctly equipped, the windrower can also tow a header.
The windrower should generally
NOT be towed, however, as this can result in damage to the hydrostatic drives, though a
procedure for emergency towing is provided.
Driving on Road in Engine-Forward Mode
The M1170 NT5 Windrower is designed to be driven on the road with the engine facing forward to provide better visibility
for the Operator and improved stability for the machine.
Windrowers sold in North America can also be driven on roads in cab-forward mode, with or without a header attached,
but at a reduced speed, under restricted conditions. For instructions, refer to
Driving on Road in Cab-Forward Mode, page
142 .
CAUTION
Windrowers sold outside of North America: Do NOT drive the windrower on the road in cab-forward mode, as the
lighting and marking will not be compliant with road regulations.
WARNING
A collision between the windrower and other vehicles may result in injury or death.
WARNING
When driving the windrower on public roadways:
•
Obey all highway traffic regulations in your area. Arrange to have pilot vehicles in the front and the rear of the
windrower, if doing so is required by law.
•
Display a slow-moving vehicle emblem and flashing warning lights, unless these actions are prohibited by law.
•
If the width of the attached header impedes other vehicle traffic, remove the header and install a MacDon-
approved weight box on the windrower. This will allow the windrower to be driven safely on roadways without an
attached header.
OPERATION