215922
132
Revision A
WARNING
Check to be sure all bystanders have cleared the area.
1015004
A
B
Figure 4.32: Console
6.
Slowly push throttle (A) to the full forward (operating
speed).
7.
Move GSL (B) out of PARK and slowly forward to the
desired speed.
NOTE:
The transmission is most efficient with the engine at full
speed and the GSL fully forward. The windrower can be
equipped with an automatic steering system for use in the
field. An automated steering system is available as an
option and can be installed by a MacDon Dealer. The GSL
has been pre-wired at the factory with a switch. For more
information, refer to
6.2.1 Automated Steering Systems,
Driving in Reverse in Cab-Forward Mode
WARNING
Back up slowly. Hold the steering wheel at the bottom and turn the wheel in the direction you want the rear of the
machine to travel.
1015004
A
B
Figure 4.33: Console
1.
Move throttle lever (A) to a mid-range position.
NOTE:
Reversing in low speed range and at reduced engine speed
is recommended since steering will be less sensitive than at
higher speed settings.
WARNING
Check to be sure all bystanders have cleared the area.
2.
Move ground speed lever (GSL) (B) rearward to the
desired speed.
