215922
195
Revision A
Reversing Header
When reversing, the following header functions will turn in reverse:
•
D1XL Series:
knife
•
D1X Series:
knife
•
A40DX:
knife, conditioner, auger, and reel
•
A40DX GSS:
knife, auger, and reel
Reverse
the header as follows:
1012982
C
B
A
Figure 4.168: Header Drive Controls
1.
Press and hold HEADER DRIVE REVERSE button (A).
2.
Press and hold HEADER ENGAGE switch (B). Pull up on
collar (C), until switch (B) is in the ENGAGED position.
3.
When you are ready to return to forward operation, release
HEADER DRIVE REVERSE button (A) to stop the header.
4.
Push down HEADER ENGAGE switch (B) to OFF position. The
header can now be restarted. For instructions, refer to
Engaging and Disengaging the Header, page 194
4.6.4
Adjusting Header Angle
Header angle is the angle between the ground and the drapers/cutterbar. It is adjustable to accommodate crop conditions
and soil types.
Refer to the appropriate header operator
’
s manual for the range of adjustment and recommended settings for your
particular header.
