215922
177
Revision A
1019465
A
B
C
D
E
Figure 4.125: Knife/Reel Drive Multicoupler
5.
Push lock button (A) and pull handle (B) to disengage
multicoupler (C). Disconnect the hydraulics from the rear
knife/reel drive receptacle.
NOTE:
Firmly hold handle (B) when disconnecting multicoupler (C).
Pressure may cause the handle to kick back with force.
6.
Route knife/reel drive hose bundle back to storage
position (D) on the hydraulic hose management system.
7.
Remove any debris that may have accumulated on the
receptacle. Close cover (E).
1015768
A
B
C
D
E
Figure 4.126: Draper/Reel Multicoupler
8.
Push lock button (B), and pull handle (C) to disengage
multicoupler (A). Disconnect the hydraulics from the
windrower draper drive/reel lift receptacle.
9.
Disconnect electrical connector (E).
10. Remove any debris that may have accumulated on the
windrower front receptacle, and close cover (D).
1019462
A
B
C
Figure 4.127: Hydraulic Hose Management System
11. Route draper drive/reel hose bundle back to storage
position (A) on hydraulic hose management system (B).
12. Insert electrical connector into storage cup (C).
