MacDon M1170NT5 Operator'S Manual Download

Page: 398 / 504

215922

378

Revision A

6.2

Cab

Several cab amenities are available which can make using the windrower more convenient for the Operator.

6.2.1

Automated Steering Systems

A MacDon-approved automated steering system is available from any MacDon Dealer which provides Trimble

global

positioning system (GPS) installation and support services.

MacDon windrowers are partially pre-wired for either the Trimble

AutoPilot

™

hydraulically integrated steering system or

the Trimble

EZ-Pilot

wheel/column-based assisted steering system. The windrower

’

s ground speed lever (GSL) has an

automated steering (autosteer) engage switch.

The Trimble

EZ-Pilot

system for model year 2019 and later machines requires the MacDon EZ-Pilot

Ready kit

(MD #B6602). Installation instructions (MD #214623) are included in the bundle.

The Trimble

AutoPilot

™

system for model year 2019 and later machines requires the MacDon Trimble

Autopilot

™

Ready

kit (MD #B6601). Installation instruction (MD #214624) is included in the bundle.

Other GPS providers may supply parts in their vehicle-specific installation packages or make installation kits available
through MacDon Dealers.

OPTIONS AND ATTACHMENTS

Summary of Contents for M1170NT5

























































































































































































































































































































































































































































































































Search results

Summary of Contents for M1170NT5

Reviews:

Related manuals for M1170NT5

Brands by name

Popular brands

MacDon M1170NT5, Operator'S Manual

Search results

Summary of Contents for M1170NT5

Reviews:

Related manuals for M1170NT5

Brands by name

Popular brands