215922
120
Revision A
IMPORTANT:
Before starting the windrower, check the levels of the following fluids, and add more if necessary:
•
Engine oil
–
refer to
Checking Engine Oil Level, page 118
•
Hydraulic oil
–
refer to
5.7.3 Checking Hydraulic Oil, page 272
•
Gearbox oil
–
refer to
5.7.7 Checking Engine Gearbox Lubricant Level and Adding Lubricant, page 275
IMPORTANT:
Do
NOT
tow the machine to start the engine. Damage to the hydrostatic drives will result.
NOTE:
When the windrower console receives a wake-up signal, the console awakens from sleep mode and closes the battery
disconnect relay. The Harvest Performance Tracker (HPT) goes into a boot-up sequence that takes approximately
40 seconds. The following items trigger a wake-up signal for the console:
•
Key switch ignition or accessory positions
•
Cab door switch
•
Horn button
•
Hazards button
•
Field lights button
•
Clearance lights button
•
Road lights button
•
High beam button
1030575
A
Figure 4.12: Engine Exhaust
1.
Before starting the engine, ensure that engine exhaust
pipe (A) is not covered or obstructed.
NOTE:
Before taking the GSL out of PARK, let the hydraulic oil
warm up to 32°C (90°F). You can view the hydraulic oil
temperature on Run Screen 4 on the Harvest Performance
Tracker (HPT) display. For instructions, refer to
.
