215922
61
Revision A
3.10
Cab Temperature
The temperature in the windrower cab is regulated by a climate control system which can provide filtered cool or warm air.
The heater shut-off valve must be open for the heater to work properly.
The heater/evaporator/blower assembly is located under the cab floor and is accessible from beneath the windrower.
3.10.1
Heater Shut-Off Valve
A shut-off valve at the engine allows the cab heater to be isolated from the engine coolant.
1015484
A
A
Figure 3.36: Heater Shut-Off Valve
Valve (A) must be open to provide heat to the cab, but can be
closed for maximum cooling.
3.10.2
Air Distribution
Cab air distribution is controlled through adjustable air vents located in the cab posts.
1014906
A
B
C
Figure 3.37: Adjustable Air Vents
You can adjust vent (A) to open/close (B) or to change
direction (C) of the air flow.
3.10.3
Climate Controls
The climate controls are located on the console. Use them to change the temperature or adjust the air movement inside
the cab.
NOTE:
When switches (A), (C), (D), and (E) are activated, the LED light on the switch will turn amber.
