79
47DAC OPERATING MANUAL EM-9518-B Rev.4
■
SETTING RANGE OF BARGRAPH LOWER AND UPPER LIMITS
The bargraph lower and upper limits can be set within the range of -20000 to 100000.
The default values per input type are as shown in the following tables.
• INPUT CODE: 1 [MODEL: 47DAC-1XX-XX]
INPUT TYPE
(MAIN DISPLAY)
DEFAULT VALUE
0 – 0.2 V
(0.2V)
Bargraph lower limit:
Bargraph upper limit:
0 – 2 V
(2V)
Bargraph lower limit:
Bargraph upper limit:
0 – 20 V
(20V)
Bargraph lower limit:
Bargraph upper limit:
0 – 200 V
(200V)
Bargraph lower limit:
Bargraph upper limit:
• INPUT CODE: 2 [MODEL: 47DAC-2XX-XX]
INPUT TYPE
(MAIN DISPLAY)
DEFAULT VALUE
0 – 0.2 mA
(0.2MA)
Bargraph lower limit:
Bargraph upper limit:
0 – 2 mA
(2MA)
Bargraph lower limit:
Bargraph upper limit:
0 – 20 mA
(20MA)
Bargraph lower limit:
Bargraph upper limit:
0 – 200 mA
(200MA)
Bargraph lower limit:
Bargraph upper limit:
IMPORTANT
• The bargraph lower and upper limits are returned to the previously set values per input type (or default values when the
input type is selected for the first time) when the input type has been changed.
• The bargraph lower and upper limits change according to changes of the display scaling values. The bargraph lower
limit is reset to the same value as the display scaling value Zero, and the upper limit is reset to the same value as the
display scaling value Span. After setting the display scaling values, the bargraph lower and upper limits can be set
arbitrarily.
• It is recommended to use the bargraph lower and upper limits within the set display scaling range.
