M-system 47DAC, Operating Manual

Page: 239 / 251

239 47DAC OPERATING MANUAL EM-9518-B Rev.4
MODE PARAMETER SETTING RANGE SUB DISPLAY /
INDICATOR MAIN DISPLAY DEFAULT
VALUE DECIMAL
POINT
POSITION UNIT
Advanced
setting Event trigger mode Normal, sampling hold,
peak hold,
valley (bottom) hold,
peak-to-peak hold
, ,
, ,
---- ----
ON timing delay 000.0 – 999.9
to
---- Second
OFF timing delay 000.0 – 999.9
to
---- Second
Startup timer 00.0 – 99.9
to
---- Second
Averaging type Moving average,
simple average
,
---- ----
Averaging time None, 2, 4, 8, 16, 32, 64,
128, 256, 512
, ,
, ,
, ,
, ,
,
---- Sample
Low-end cutout OFF, ON,
absolute value ON
, ,
---- ----
Low-end cutout
value 000 – 999
to
---- User-defined
Display color Green (normal) to red
(alarm), green,
red (normal) to green
(alarm), red
, ,
,
---- ----
Automatic return
time to Measuring
Mode 00 (automatic return
disabled)
01 – 99
to
---- Second
Transition time to
Lockout Setting
Mode 00 – 99
to
---- Second
Display refreshing
rate 00.0 – 99.9
to
---- Second
Manual sub display
reset Alarm setpoint display
automatically reset, alarm
setpoint display manually
reset
,
---- ----
P output No P output,
alarm setpoint LL,
alarm setpoint L,
alarm setpoint H,
alarm setpoint HH
/
, , ,
, ,
, ,
---- ----
Latching alarm No latching,
output latched / measur-
ing continued,
output latched / measur-
ing stopped
, ,
---- ----
Alarm power ON
delay 000.0 – 999.9
to
---- Second
Standby sequence Output immediately at the
startup,
output standing by until
the input enters P zone
,
---- ----
Scaling error Alarm trip action valid at
over-range,
no alarm trip action at
over-range
,
---- ----
Round off low-digit
reading
No round-off (1), 2,
5, 10
, ,
,
---- ----
Display reading type Measured value,
MAX value,
MIN value
, ,
---- ----
High-pass filter High-pass filter OFF,
high-pass filter ON
,
---- ----
Backlight brightness 1 (dark) to 3 (bright)
to
---- ----
NOTE 2: SUB DISPLAY/INDICATOR: = ON, = Blinking