72
47DAC OPERATING MANUAL EM-9518-B Rev.4
■
SHIFTING THROUGH SETTING PARAMETERS
(1) Parameter shifting in Scaling Setting Mode
In Scaling Setting Mode, pressing Alarm/
↓
button shifts one parameter to the next (clockwise in the following figure). Press-
ing Scale/
↑
button shifts one to the previous (counterclockwise).
NOTE
• The display depends on the specifications and settings. The above displays show default values with the input code ‘1’
and type ‘200V’.
• Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode from each parameter.
Measuring Mode
Input scaling value Zero
Display scaling value Zero
Input scaling value Span
Display scaling value Span
Decimal point position
for ≥ 3 sec.
Hold down Scale/
↑
Input type
Analog output function mode
*
2
Analog output 0% adjustment
*
2
Analog output 100% adjustment
*
2
*
1 Disabled with “no bargraph” selected for the bargraph type parameter.
*
2 Disabled with no-DC-output type (DC output code ‘0’ ).
Scaling Setting Mode
Bargraph type
Bargraph lower limit
*
1
Bargraph upper limit
*
1
Analog output type
*
2
Analog output 0%
*
2
Analog output 100%
*
2
