141
47DAC OPERATING MANUAL EM-9518-B Rev.4
13.1 LOW-END CUTOUT
13.1.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the specifications and settings.
1
Hold down Alarm/
↓
and Scale/
↑
buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
• The averaging type is indicated.
• The SD indicates ‘AVE-TP’.
NOTE
With the I/O option code ‘6’ or ‘A’, the event trigger mode is indicated (‘EVENT’ on the SD).
2
Press Alarm/
↓
or Scale/
↑
button to go to the low-end cutout
setting.
• The low-end cutout is indicated.
• The SD indicates ‘ZEROLMT’.
3
Press Shift and Up buttons to select the low-end cutout.
• Select one among ‘OFF’, ‘ON’ and ‘ABS’.
1,2,
4
1,2,
4
3
3
Blinking
