38
47DAC OPERATING MANUAL EM-9518-B Rev.4
1.7.13 ATTACHING/REMOVING TERMINAL COVER
Be sure to put the terminal cover on for safety after wiring.
■
ATTACHING TERMINAL COVER
Fit the convex part A of the meter in the concave part B of the terminal cover and push the cover until it clicks into place.
■
REMOVING TERMINAL COVER
(a) Insert the minus tip of a screwdriver into a hole at the lower left corner of the cover.
(b) Pull the handle upward.
(c) Then insert the screwdriver into a hole at the lower right corner.
(d) Pull the handle upward to separate the terminal cover.
Terminal cover
B
A
Terminal cover
(a)
(b)
(c)
(d)
