181
47DAC OPERATING MANUAL EM-9518-B Rev.4
22.1 BCD LOGIC
22.1.1 OPERATING PROCEDURE
NOTE
Procedures to set the DATA output logic are described
here. To set other I/O logics, the procedures are same.
1
Hold down Alarm/
↓
and Scale/
↑
buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
• The averaging type is indicated.
• The SD indicates ‘AVE-TP’.
NOTE
The event trigger mode is indicated (‘EVENT’ on the SD) with the I/O option code ‘A’.
2
Press Alarm/
↓
or Scale/
↑
button to go to the DATA output logic
setting.
• The DATA output logic is indicated.
• The SD indicates ‘BCD-DAT’.
3
Press Shift and Up buttons to select the DATA output logic.
• Select ‘ON’ or ‘OFF’.
1,2,
4,5
1,2,
4,5
3
3
Blinking
