192
47DAC OPERATING MANUAL EM-9518-B Rev.4
23.5 TIMER
23.5.1 OPERATING PROCEDURE
NOTE
Procedures to set the T1.5 timer are described here. To
set the T3.5 timer, the procedures are same.
1
Hold down Alarm/
↓
and Shift buttons at once for 3 seconds or
more to move on to Modbus Setting Mode.
• The device address is indicated.
• The SD indicates ‘EQP-NO’.
2
Press Alarm/
↓
or Scale/
↑
button to go to the T1.5 timer setting.
• The T1.5 timer is indicated.
• The SD indicates ‘T15’.
NOTE
The SD indicates ‘T35’ with the T3.5 timer.
3
Press Shift button to shift the display into the setting standby
mode. Then press Shift and Up buttons to set the T1.5 timer.
• The second digit starts blinking, to which you can apply changes.
• Set within the range of 01 to 60.
NOTE
The decimal point is not indicated. Set as ‘setting value × 0.1’.
1,2,
4,5
2,4,
5
1,3
3
Blinking
