Chapter 13 Upgrading PSAX System Software
Upgrading Using the XModem/YModem File Transfer Method
13-16
255-700-447
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Begin
1
To set up the cabling and connections between the PC workstation, the
local modem, and the telephone line, do one of the following as shown
in Table 13-8.
2
To set up the cabling and connections between the PSAX system CPUn
module, the remote modem, and the telephone line, do the following as
shown in Table 13-9.
3
On the PC workstation, start up the VT100 terminal emulation software,
and set up the configuration preferences. See any PacketStar PSAX Multi-
service Media Gateway user guide for more information.
4
Using the terminal emulator modem communication function, enter the
telephone number of the line connected to the modem connected to the
PSAX system.
End
Downloading Software Files Using XModem/YModem
Perform the steps in the following procedure to download software files to
your PSAX system.
Begin
1
Using the VT100 terminal emulator, log on to the PSAX system.
2
On the Console Interface Main Menu window, select the Software Ver-
sion Configuration option.
Table 13-8. Setting Up the Connection Between the PC Workstation, the Local
Modem, and the Telephone Jack
If you are using an...
connect a cable from the...
external modem
EIA-232 interface port on the PC workstation to
the modem, and a cable from the modem to the
telephone jack.
internal modem
modem port on the PC workstation to the tele-
phone jack.
Table 13-9. Setting Up the Connection Between the Modem and the PSAX
System
Connect a cable from the...
to the...
CONSOLE
port on the primary CPUn module
modem.
modem
telephone jack.
