Chapter 6 Configuring ATM PNNI
Configuring a Summary Address
6-38
255-700-447
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1
Release 9.0.0
Configuring a Summary Address
The PSAX system allows up to 20 PNNI summary addresses. To configure
PNNI summary addresses, perform the following procedure.
Begin
1
On the PNNI System-Wide Configuration window, select the PNNI
Summary Address Configuration command.
The PNNI Summary Address Table window is displayed (see
Figure 6-17).
2
Select the Add Summary Address Entry command.
The PNNI Summary Address Configuration window is displayed (see
Figure 6-18)
3
Enter the values for this window according to the information provided
in Table 6-31.
4
After setting all the values on the window, select Apply Configuration
or press Ctrl+A.
5
Select the Create Summary Address Entry command.
This entry is added to the PNNI Summary Address Table.
A trap message confirming the configuration application appears at the
bottom of the window.
6
Type Ctrl+G to return to the Console Interface Main Menu and save the
configuration.
End
[TNS Type]
Default: National-
NetworkId
Range:
Format:
Displays the type of network ID used for the transit
network.
[TNS Plan]
Default: CarrierId-
Code
Range:
Format:
Displays the type of network ID Plan that the net-
work has been assigned.
[TNS Id]
Default: 0
Range:
Format:
Displays the value of the transit network identifier.
Table 6-28. Field Descriptions for the PNNI Map TNS Configuration Window (Continued)
Field Name
Field Values
Description
